| S.No | Details |
| 1 | R. Venkatachalam, M. Boopathi, P.C. Murugan, K. Venkatesh Raja, Enhancing CI engine efficiency with onboard oxygen concentrator: An experimental study and RSM optimization, Thermal Science and Engineering Progress, Vol: 62, 2451-9049, May, 2025 |
| 2 | M. Boopathi, R. Venkatachalam, Optimizing compression ignition engine performance and emissions with onboard oxygen concentrator: an experimental study, Clean Technologies and Environmental Policy, Vol: 26, Issue:7, 1618-9558, January, 2024 |
| 3 | P. Marisami, R. Venkatachalam, Design and experimental validation of a high performance polycentric prosthetic knee joint for transfemoral amputees in developing countries, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol: 45, Issue:3, 1806-3691, February, 2023 |
| 4 | S. JEYAPRAKASAM, M. KATHIRSELVAM, C. VELMURUGAN, R. VENKATACHALAM, EXPERIMENTAL STUDY OF PROCESS PARAMETERS ON MACHINING PERFORMANCE IN ELECTRO-DISCHARGE MACHINING OF 6061Al/TiC/Gr COMPOSITES, Surface Review and Letters, Vol: 29, Issue:4, 1793-6667, February, 2022 |
| 5 | Ganapathi Saravanan, Ramasamy Venkatachalam and Gurusamy Nallakumarasamy, Experimental assessment on the impact of cutouts on a hollow shaft system, Materials Testing, Vol: 62, Issue:11, 2195-8572, February, 2021 |
| 6 | P Senthilkumaran, R Venkatachalam and K Venkatesh Raja, Vibration Analysis of a multi core sandwich composite beam with cutouts?A critical investigation, Materials Research Express, Vol: 8, Issue:7, 2053-1591, February, 2021 |
| 7 | Duraisamy Jagadeesh, Ramasamy Venkatachalam and Gurusamy Nallakumarasamy, Experimental and numerical study of an overlay composite absorber plate material for a solar air heater, Materials Testing, Vol: 63, Issue:7, 2195-8572, July, 2021 |
| 8 | P. Marisami, R. Venkatachalam, Towards optimal toe-clearance in synthesizing polycentric prosthetic knee mechanism, Computer Methods in Biomechanics and Biomedical Engineering, Vol: 25, Issue:6, 1476-8259, August, 2021 |
| 9 | P. MANUNEETHI ARASU, A. KARTHIKEYAN, R. VENKATACHALAM V. KRISHNARAJ, INVESTIGATION ON IMPACT PROPERTIES FOR GLASS FIBER, JUTE FIBER AND HYBRID GLASS/ JUTE REINFORCED COMPOSITES MANUFACTURED BY HAND LAYUP AND VARTM PROCESS FOR AUTOMOBILE APPLICATION, Journal of the Balkan Tribological Association, Vol: 25, Issue:2, 1310-4772, February, 2019 |
| 10 | P. Manuneethi Arasu A. Karthikayan R. Venkatachalam, Mechanical and thermal behavior of hybrid glass/jute fiber reinforced composites with epoxy/polyester resin, Polimery, Vol: 64, Issue:7, 2957-0263, August, 2019 |
| 11 | Suresh Chinnusamy, Venkatachalam Ramasamy, Subburam Venkatajalapathy, Gobinath Velu Kaliyannan, Sathish Kumar Palaniappan, Experimental investigation on the effect of ceramic coating on the wear resistance of Al6061 substrate, Journal of Materials Research and Technology, Vol: 8, Issue:6, 2214-0697, November, 2019 |
| 12 | Ganapathi Saravanan, Ramasamy Venkatachalam, and Gurusamy Nallakumarasamy, Effects of cut-outs on the vibrational characteristics of a hollow shaft system, Materials Testing, Vol: 61, Issue:7, 2195-8572, July, 2019 |
| 13 | S. JEYAPRAKASAM, R. VENKATACHALAM, C. VELMURUGAN, EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF TiC/GRAPHITE REINFORCEMENT IN WEAR BEHAVIOR OF Al 6061 HYBRID COMPOSITES, Surface Review and Letters, Vol: 26, Issue:4, 1793-6667, April, 2018 |
| 14 | P Kanagarajan S Sundaram A Kumaravel R Rajasekar R Venkatachalam, Prediction of the Surface Roughness and Wheel Wear of Modern Ceramic Material (Al2O3) during Grinding Using Multiple Regression Analytical Model, Indian Journal of Engineering and Materials Sciences, Vol: 24, Issue:7, 0975-1017, February, 2017 |
| 15 | Duraisamy JAGADEESH, Ramasamy VENKATACHALAM and Gurusamy NALLAKUMARASAMY, TRANSIENT COMPUTATIONAL FLUID DYNAMICS INVESTIGATIONS ON THERMAL PERFORMANCE OF SOLAR AIR HEATER WITH HOLLOW VERTICAL FINS, Thermal Science, Vol: 22, Issue:6, 2683-3867, November, 2017 |
| 16 | Periyasamy Kanakarajan, Sengottuvelu Sundaram, Arumugam Kumaravel, Rathanasamy Rajasekar and Ramasamy Venkatachalam, Acoustic emission testing of the machining performance of SiC grinding wheel shaped Al2O3 ceramics, Materials Testing, Vol: 58, Issue:10, 2195-8572, November, 2016 |
| 17 | G. Saravanan, G. Nallakumarasamy, R. Venkatachalam, Tribological and Thermal Characterization of Glass Fiber - A Review, Journal of Environmental Nanotechnology, Vol: 4, Issue:2, 2319-5541, May, 2015 |
| 18 | D. Jagadeesh, R. Venkatachalam, G. Nallakumarasamy, Characterisation of Banana Fiber - A Review, Journal of Environmental Nanotechnology, Vol: 4, Issue:2, 2319-5541, May, 2015 |
| 19 | R. Venkatachalam S. Balasivanandha Prabu, Vibration characteristics of orthotropic shaft?disk system with different constrained damping layers: experimental and numerical study, The International Journal of Advanced Manufacturing Technology, Vol: 65, Issue:5, 0268-3768, May, 2012 |
| 20 | R. Venkatachalam S. Balasivanandha Prabu, Vibration and damping analysis of orthotropic sandwich shaft-disc system using finite element method, International Journal of Mechanics and Materials in Design, Vol: 8, Issue:5, 1569-1713, May, 2012 |
| 21 | R.Venkatachalama, S.Balasivanandha prabu, An experimental investigation on the vibration responses of a mild steel sandwich shaft disc system, Advanced Materials Research, Vol: 54, 1662-8985, October, 2012 |
| 22 | R Venkatachalam, S Balasivanandha Prabu and K Venkatesh Raja, Finite element based investigation on vibrational performance of a sandwich system, Journal of Vibration and Control, Vol: 18, Issue:9, 1077-5463, June, 2011 |
| 23 | R. Venkatachalam S. Balasivanandha Prabu K. Venkatesh Raja, Effect of constrained layers on vibrational characteristics of a composite sandwich system?A finite element based critical investigation, International Journal of Mechanics and Materials in Design, Vol: 7, Issue:4, 1569-1713, August, 2011 |
KSR College of Engineering